What are you trying to heat?

A self-operated valve, like a Fisher Big Joe or Kimray Motor Valve

A pilot-operated regulator like a Mooney Flowgrid or a Fisher EZR

A pipeline carrying natural gas for a small city gate station or compressor fuel gas

Equipment or personnel within an enclosed environment

Enclosure Package 1
Enclosure Package 2

Great! You're looking for an Enclosure Package.

Now, do you know the name or type of valve you're trying to heat?

1" or 2" NPT Fisher Big Joe or 627 or 630

2" Flanged Fisher Big Joe or 627

1" NPT Kimray Motor Valve

1" NPT Fisher D4

High Pressure Instrumentation Regulators including Meco and Fisher 1301

Variety of Kimray 2" NPT or Flanged Backpressure Valves and Regulators

2" Flanged or NPT flow Control Valves and Chokes including Merla and Tejas

Variety of 2" NPT valves including Kimray and Norriseal

Variety of 2" Flanged valves including Kimray and Fisher D Body

2" Flanged valves including Fisher D4

I don't know

None of these

Is this application in an NEC classified hazardous area
(Class I, Division 1 or 2)?

If you are unsure, please contact us at 972-563-8065 or send an email to [email protected] so that we may help you find the appropriate product configuration for your needs.

Yes

Pilot Preheater 1

Great! You're looking for a Pilot Preheater.

Now, we just need to know a few additional specifications to help you find the right one.

Starting Voltage

Our catalytic pilot preheaters are available with either a 12-volt or 120-volt starting element.

12-Volt

120-Volt

Heat Exchange

A Dual Heat Exchange Coil allows the unit to heat two supply lines at once. This is commonly used with multiple regulators being used as worker/monitors or for stations taking multiple pressure cuts.

Single

Dual

High Pressure Regulator

All of our Model 2600 pilot preheaters include a fuel gas regulator that can take up to 150 PSI. If your only gas pressure available is above 150 PSI, we recommend the high pressure fuel gas regulator option.

Yes

Shutoff Valve and Thermocouple

For most outdoor applications, CATCO recommends using heaters without the valve and thermocouple. The low temperature shutoff valve shuts the heater off in the event of a failure, but makes the heaters less reliable.

Yes

Great! You're looking for line heating.

Please fill out the form below so we can assist you in finding the right product.

Great! You're looking for a Space Heater.

Here is some additional information to help you find the right one.

Our catalytic space heaters vary in size and BTU rating, so choosing the right product begins with assessing the space that you are trying to heat. Here are a few examples to demonstrate how our space heaters can affect the temperature within some commonly sized buildings and enclosures.

Insulated 20’x60’ building with gable roof

(8) 24x60 heaters (480,000 BTU total) will raise the average temperature inside the building by 65F.

Insulated 20’x20’ building with gable roof

(4) 12x36 heaters (72,000 BTU total) will raise the average temperature inside the building by 65F.

Insulated 10’x10’ building with flat roof

(2) 12x36 heaters (36,000 BTU total) will raise the average temperature inside the building by 65F.

Non-insulated 3’x3’x8’ enclosure

(1) 12 x 12 heater (6,000 BTU total) will raise the average temperature inside the enclosure by 35F.

See all of our Space Heaters

Click the button below to see all of our standard-sized heaters along with their technical specifications.

View All Space Heaters

Or let us help you.

We are happy to help size a heater specifically for the building or space that you are trying to heat. Enter the information below to have one of our representatives contact you.

We are unable to determine the specific product that meets your needs.

Please click here to view a list of all of our products.

View All Products

Don't know which specifications to select?

Enter the information below to have one of our representatives contact you.

Or let us help you.

Enter the information below and one of our representatives will contact you.

Thank you for your request. A company representative will be in contact with you soon.

Return to Home Page

Product Finder

What are you trying to heat?

Great! You're looking for an Enclosure Package.

Now, do you know the name or type of valve you're trying to heat?

Is this application in an NEC classified hazardous area
(Class I, Division 1 or 2)?

If you are unsure, please contact us at 972-563-8065 or send an email to [email protected] so that we may help you find the appropriate product configuration for your needs.

Great! You're looking for a Pilot Preheater.

Now, we just need to know a few additional specifications to help you find the right one.

Starting Voltage

Heat Exchange

High Pressure Regulator

Shutoff Valve and Thermocouple

Great! You're looking for line heating.

Please fill out the form below so we can assist you in finding the right product.

Great! You're looking for a Space Heater.

Here is some additional information to help you find the right one.

Insulated 20’x60’ building with gable roof

Insulated 20’x20’ building with gable roof

Insulated 10’x10’ building with flat roof

Non-insulated 3’x3’x8’ enclosure

See all of our Space Heaters

Click the button below to see all of our standard-sized heaters along with their technical specifications.

Or let us help you.

We are happy to help size a heater specifically for the building or space that you are trying to heat. Enter the information below to have one of our representatives contact you.

We are unable to determine the specific product that meets your needs.

Please click here to view a list of all of our products.

Don't know which specifications to select?

Enter the information below to have one of our representatives contact you.

Or let us help you.

Enter the information below and one of our representatives will contact you.

Need Some Help?

Product Finder

What are you trying to heat?

Great! You're looking for an Enclosure Package.

Now, do you know the name or type of valve you're trying to heat?

Is this application in an NEC classified hazardous area (Class I, Division 1 or 2)?

If you are unsure, please contact us at 972-563-8065 or send an email to [email protected] so that we may help you find the appropriate product configuration for your needs.

Great! You're looking for a Pilot Preheater.

Now, we just need to know a few additional specifications to help you find the right one.

Starting Voltage

Heat Exchange

High Pressure Regulator

Shutoff Valve and Thermocouple

Great! You're looking for line heating.

Please fill out the form below so we can assist you in finding the right product.

Great! You're looking for a Space Heater.

Here is some additional information to help you find the right one.

Insulated 20’x60’ building with gable roof

Insulated 20’x20’ building with gable roof

Insulated 10’x10’ building with flat roof

Non-insulated 3’x3’x8’ enclosure

See all of our Space Heaters

Click the button below to see all of our standard-sized heaters along with their technical specifications.

Or let us help you.

We are happy to help size a heater specifically for the building or space that you are trying to heat. Enter the information below to have one of our representatives contact you.

We are unable to determine the specific product that meets your needs.

Please click here to view a list of all of our products.

Don't know which specifications to select?

Enter the information below to have one of our representatives contact you.

Or let us help you.

Enter the information below and one of our representatives will contact you.

Need Some Help?

Is this application in an NEC classified hazardous area
(Class I, Division 1 or 2)?